Forty-Three Million Wheels...
A leader in the manufacture of
cast aluminum automotive wheels.
Our products can be found on some
of the most popular vehicles today.
Our products can be found on some
of the most popular vehicles today.
Job Openings
-
Inspection Operator
$18.05 - $22.05 / Hour
-
First Line Supervisor
$28.00 - $38.65 / Hour
-
Maintenance Shift Supervisor
3/4 Schedule, Nights
-
Casting Utility Operator
$21.65 - $25.65 / Hour
Inspection Operator: $18.05-$22.05 / Hour
Skills:
- Read, Write, Basic Math, comprehends and follows procedures.
- Department Specific Skills:
- Ability to de-burr wheels using right hand.
- Ability to identify both functional and cosmetic defects.
- Ability to differentiate between wheel types.
- Ability to palletize wheels.
- Ability to make pallet tags.
- Ability to learn and rotate to several jobs as required. (de-burring, conveyor loading, palletizing, etc.).
Responsibilities:
- Learning skills: Gain and demonstrate knowledge and ability of above skills within qualifying period.
- Safety: Responsible for PPE, 5S, reporting potential safety issues, reporting accidents, and following specific safety procedures. Also, using proper lifting technique.
- Quality: Check every wheel for obvious defects and damage.
- Output: Meet established targets for each shift and work a reasonable amount of overtime when required.
- Cost Control: Avoid excessive use of gloves, foam retention, 5S supplies, etc.
- Teamwork/Communications: Work together to achieve overall First Time Through, Yield, Goals, etc. Assist in training new Associates and participation in A4S programs highly encouraged. Communicate any issues to First Line Supervisor as they occur.
- Attendance: Demonstrate excellent attendance.
- Rotate to and perform several jobs as required. (de-burring, conveyor loading, palletizing, etc.)
- Perform other duties as assigned by the department First Line Supervisor, department Supervisor and/or Superintendent.
Effort:
- Handle approximately 2000 wheels per shift (de-burr 500, palletize 750, load 750)
- Wheel weights range from 13 to 40 lbs. and average 26.5 lbs.
- Pick-up wheels and palletize/de-palletize from approximately 20"~51" height.
- Constant standing and bending and frequent pushing, pulling or turning while moving wheels and dividers.
- Constant gripping, wrist and arm movements for up to six hours per shift.
Environment:
- Tolerate temperature of up to 90 degrees during summer months (June-Aug).
- Work near cutting fluid and mist.
- Stand on padded concrete floors.
Job Type:
- Full-time
Pay:
- $18.05 - $22.05 per hour
Schedule:
- 12 hour shift
- Day shift
- Night shift
- Overtime
- Weekends as needed
Hours:
- 2nd shift - 3:50 pm - 12:00 am, Sunday - Thursday
- Expected hours: 40 per week
Benefits:
- 401(k)
- 401(k) matching (6%)
- Dental insurance
- Health insurance
- Life insurance
- Paid time off
- Vision insurance
Work Location:
- In person
- Ability to Commute to Saint Marys, OH 45885 is required.
- If necessary, ability to relocate to Saint Marys, OH 45885
- Relocate before starting work is required.
First Line Supervisor: $28.00 - $38.65 / Hour
RESPONSIBILITIES:
- Plans and delegates production assignments under the direction of the Department Supervisor.
- Orients and trains associate to perform tasks in compliance with safety/environmental, quality, productivity, housekeeping, and general policies.
- Communicates with other departments and shifts to maintain proper coordination of production and maintenance tasks.
- Reviews and analyzes production processes and results and implements corrective action, where necessary.
- Compiles information for periodic reports with respect to various topics including quality, safety, environment, attendance, productivity, and scrap.
- Reviews associate performance and provides appropriate feedback and counseling under the direction of the Department Supervisor.
- Provides open, two-way communications with associates through daily contact, and shift start and monthly meetings.
- Assists with hands-on production tasks.
QUALIFICATIONS:
- At least three years of experience with a high-volume manufacturing company is required.
- At least one year of supervisory/leadership experience is required.
- Experience with key performance indicators (KPI's), such as efficiency, scrap rates, downtime, etc. is required.
- Experience with Lean principles--visual management, creating workflow, eliminating waste, 5S, Kaizen, and continuous improvement is also required.
- High school diploma or G.E.D. is required; Related associate degree, or equivalent, is preferred.
- Working knowledge of IATF 16949 or ISO systems and standards is required.
Job Type:
- Full-time
Pay:
- $28.00 - $38.65 per hour
Benefits:
- 401(k)
- 401(k) matching (6%)
- Dental insurance
- Employee assistance program
- Health insurance
- Health savings account
- Life insurance
- Paid time off
- Referral program
- Tuition reimbursement
- Vision insurance
Schedule:
- 12 hour shift
- 4x12
- Evening shift
- Overnight shift
- Weekends as needed
Work Location:
- In person
- Ability to Commute to Saint Marys, OH 45885 is required.
- If necessary, ability to relocate to Saint Marys, OH 45885
- Relocate before starting work is required.
Maintenance Shift Supervisor: 3/4 Schedule, Nights
RESPONSIBILITIES:
- Plans and delegates maintenance assignments under the direction of the Department Supervisor.
- Orients and trains associate to perform tasks in compliance with safety/environmental, quality, productivity, housekeeping, and general policies
- Communicates with other departments and shifts to maintain proper coordination of maintenance and maintenance tasks.
- Reviews and analyzes maintenance processes and results and implements corrective action, where necessary.
- Compiles information for periodic reports with respect to various topics including quality, safety, environment, attendance, productivity.
- Reviews associate performance and provides appropriate feedback and counseling under the direction of the Department Supervisor.
- Provides open, two-way communications with associates through daily contact, and shift start and monthly meetings.
- Assists with hands-on maintenance
QUALIFICATIONS:
- At least 2 years of experience with a high-volume manufacturing company is required.
- At least one year of supervisory/leadership experience is required.
- High school diploma or G.E.D. is required; Related associate degree, or equivalent, is preferred.
- Working knowledge of IATF 16949 systems and standards is required.
- Hydraulics
- Electrical
- Pneumatics
- Schematics/Schematic Reading
- Mechanical Maintenance
Job Type:
- Full-time
Benefits:
- 401(k)
- 401(k) matching (6%)
- Dental insurance
- Employee assistance program
- Health insurance
- Health savings account
- Life insurance
- Paid time off
- Referral program
- Tuition reimbursement
- Vision insurance
Schedule:
- Night shift
- Overtime
- Weekends as needed
Work Location:
- In person
- Ability to Commute to Saint Marys, OH 45885 is required.
- If necessary, ability to relocate to Saint Marys, OH 45885
- Relocate before starting work is required.
Casting Utility Operator: $21.65 - $25.65 / Hour
RESPONSIBILITIES:
- Setup and change dies, riser tubes and other related equipment of double-cavity or single cavity low-pressure casting machines.
- Control valves, dials, and computer touch screens of machines to regulate pressure, temperature, and set cycle times.
- Observe meters and gauges to verify and record temperatures, pressures, and cycle times, and make adjustments as necessary.
- Visually inspect and measure products for surface and dimensional defects to ensure conformance to specifications, using precision measuring instruments and take action to correct any issues.
- Observe all cooling lines to ensure proper connections.
- Set up parameters according to check sheet guidelines and troubleshoot issues as necessary.
- Perform maintenance on dies in casting machines such as greasing, stoning, chiseling, and coating. Also perform general housekeeping and 5S of working areas.
- Operate torch for die plugging issues, metal spills, etc.
QUALIFICATIONS:
- High School Graduate or General Education Degree (GED), with strong arithmetic skill.
- Six months or more of related department experience is preferred.
- Excellent safety, attendance, and above average performance ratings preferred.
Job Type:
- Full-time
Pay:
- $21.65 - $25.65 per hour
Benefits:
- 401(k)
- 401(k) matching (6%)
- Dental insurance
- Employee assistance program
- Health insurance
- Health savings account
- Life insurance
- Paid time off
- Referral program
- Tuition reimbursement
- Vision insurance
Schedule:
- 12 hour shift
- Day shift
- Night shift
- Weekends as needed
Work Location:
- In person
- Ability to Commute to Saint Marys, OH 45885 is required.
- If necessary, ability to relocate to Saint Marys, OH 45885
- Relocate before starting work is required.
The development, growth and success of Kosei have been due to individual energy, intelligence and dedication of our associates. We are always looking for qualified and motivated people to join our team. As a subsidiary of Kosei Aluminum Co., LTD., our reputation for high quality products and customer satisfaction has helped us continue to grow and to provide our more than 400 associates with over 30 years of steady employment. We have plans for future growth and joining the Kosei team will provide you a rewarding career with an excellent compensation and comprehensive fringe benefits package, including:
- Medical, Dental, and Vision Insurance
- Prescription Drug Card
- Employee Assistance Programs (EAP)
- Short & Long Term Disability
- 401(k) Retirement Savings Plan with 6 percent Company Match
- Paid Holidays
- Paid Vacations
- Bonus programs
- Company Paid Uniforms, Safety Shoes, Glasses, etc.
- Career Advancement Opportunities
If you're ready for the next step in your career development and a place to put your ideas into practice, then we want to hear from you TODAY.
You may apply on-line at our website or in person at:
1100 McKinley Road, St. Marys OH 45885
